Skip to content
Ahmad Ammar

38. Putting Part IV together

38.1 All the answers in one table

Activity What you should see Why
Activity What you should see Why
1.1A black can warms fastest and levels off highest, then white, then shiny absorption depends on albedo; warming stops at the equilibrium where absorbed = lost energy
1.1B metal feels coldest, cloth warmest, though all are at room temperature skin senses the rate of heat flow; metals conduct heat away fast
1.1C dye rises over the flame, crosses the top, sinks on the cool side; reverses when the lamp moves warm water is less dense and buoyant: convection
1.2 run 1 curves converge on the average temperature (about 27.5\(^{\circ}\mathrm{C}\)from 50 and 5\(^{\circ}\mathrm{C}\)) heat lost = heat gained, \(T_f = (m_hT_h + m_cT_c)/(m_h+m_c)\)
1.2 run 2 container flat at 0\(^{\circ}\mathrm{C}\)while ice remains; ends near 1\(^{\circ}\mathrm{C}\) melting absorbs 334 J g\(^{-1}\) without warming: latent heat
1.3A salt (or cold) water slides under fresh (or hot) water; two layers the denser fluid sinks beneath the lighter: stratification
1.3B the teabag’s ash lifts off and floats upward hot air is half as dense as room air; its rising drag beats the ash’s weight
2.1 air balloon and marshmallow swell under vacuum; water balloon and tomato do not; marshmallow ends wrinkled Boyle’s law: gases expand as pressure falls, water barely changes
2.1 cloud a cloud appears on sudden expansion expansion cools moist air with nuclei below its dew point
2.2 ballast for neutral buoyancy close to \(V - m/\rho\) (119.5 mL in the example) Archimedes: weight = weight of displaced fluid
2.3 diver sinks when squeezed, rises when released squeezing compresses the bubble, raising the diver’s density

Table 38.1. Every activity, its result and its explanation.

38.2 Mistakes to avoid

  • Using \(^{\circ}\mathrm{C}\)in \(\sigma T^4\), Wien’s law, the ideal gas law or the parcel buoyancy formula: these need kelvin.

  • Saying “heat” when you mean “temperature”: temperature is a state, heat is energy moving because of a temperature difference.

  • Thinking metal is colder than wood at the same room temperature: it only feels colder.

  • Forgetting that the cup and the container must hold equal volumes in Activity 1.2, or not stirring.

  • Calculating the Archimedes ballast with the ball’s mass in place of its volume, or forgetting the stopper above the surface.

  • Writing the prediction after the experiment. Predict first, then test; explain the difference.

38.3 Self-test

  1. Air at 20\(^{\circ}\mathrm{C}\)and 101 325 Pa: what is its density? [1.204 kg m\(^{-3}\)]

  2. How many joules melt 25 g of ice at 0\(^{\circ}\mathrm{C}\)? [8350 J]

  3. 200 g of water at 60\(^{\circ}\mathrm{C}\)is mixed with 100 g at 15\(^{\circ}\mathrm{C}\). Final temperature? [45\(^{\circ}\mathrm{C}\)]

  4. What extra pressure does a diver feel 25 m below the sea surface? [\(\approx 2.5\times10^5\) Pa, 2.5 atm]

  5. A balloon of 3.0 L at 1 atm is taken to 0.6 atm at the same temperature. New volume? [5.0 L]

  6. A ball of volume 200 cm\(^3\) and mass 50 g: how much water ballast for neutral buoyancy? [\(\approx\) 150 mL]

  7. Why does a coastal town have milder winters than an inland one at the same latitude? [the ocean’s large heat capacity]

  8. An air parcel is 2\(^{\circ}\mathrm{C}\)colder than its surroundings at 280 K. Which way does it accelerate, and how fast? [down, 0.07 m s\(^{-2}\)]